Colored concrete monocoque for facade cladding with a soft sandy appearance
Uses:
Taybeh Kout Cement colored material added to water only for concrete cladding.
Method of implementation:
After the mixing is good according to the amount of water specified in the technical bulletin, the material is separated by a thickness of the thickness depends on the size of the stone found in the suit of COT 612 / 612F and then rough in one direction, longitudinal or circular or circular in the case of the desire to give a different decorative form.
* Do not make the work of welds and prefer the work of Aramis or joints at certain distances cement layer to avoid the presence of welds distort the form of application
Technical Specifications :
Color: Available after colors
Thickness of the layer: 1 - 3 mm
Mixing water: 6.5 ± 25% per 25 kg of powder
Operating time: 30 minutes at 25 ° C (low operating temperature with high temperature).
Indicative consumption rate: from 2.75 to 3 kg / m (in case of 612F)
From 3.25 to 3.75 kg / m 2 (in the case of 612).
.jpg)
